The College through its ICT Department is now inviting applicants for Professional Short Course Training in the following areas of Technologies;

1) CISCO  IT Essential

2) Cisco (CCNA 1-4)

3) CISCO Cyber Security Operations

For More details and other Professional courses click on the link below to download the list of courses

 

Click here to Download the list of courses

 

All courses are conducted at Arusha Technical College, in Arusha 

 

5. ENQUIRIES

Mobile: +255 784 305490 

 

Mobile:  +255 763 443366

 

 

 

 

DEVELOPMENT AND TRAINING COURSES FOR THE ACADEMIC YEAR 2017/18

The mission of ATC is to provide Competence-Based Technical Education and Training and carry out research and consultancy in science and technology for socio-economic development.  Our vision is to become a centre of excellence in training, research and consultancy in science and technology in Africa by 2020.

We are pleased to announce and advertise our short courses training programmes for the academic year 2017/2018. Our programmes offer a wide range of professional as well as tailor made training. These training programmes are for both organizations and individuals. The training process involves a detailed course work as well as a lot of practical so as to enable participants to grasp more knowledge and apply it without difficulty.

REGISTRATION PROCEDURE: Applicants can apply through college website www.atc.ac.tz, by downloading and fill the application form.

CONTACTS:   Continuing Education Department

P.O.Box 296, Arusha

Tel: (+255) 27 29 70 056

Fax No. (+255) 27 254 8337

 

CIVIL ENGINEERING DEPARTMENT

 

1. Irrigation Water Quality, Crop Water Requirement and Irrigation:

Course duration: One (1) week.

Dates: 20 Nov– 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Three hundred Tanzanian shillings only (TZS 300,000/=) covering tuition fee and educational field visits.

Course Contents: Click here to read course contents

 

2Irrigation Water Management

      Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Three hundred Tanzanian shillings only (TZS 300,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

3Water quality and treatment

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018

Cost: Six hundred Tanzanian shillings only (TZS 600,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

4. Tiling

Course duration: Two (2) weeks.

Dates: 27 Nov. – 08 Dec. 2017, or 23 April – 04 May, 2018, or 18 June – 29 June, 2018.

Cost: Three hundred thousand Tanzanian shillings only (TZS 300,000 =) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

5. Plastering:

Course duration: Two (2) weeks.

Dates: 20 Nov. – 01 Dec. 2017, or 16 April – 27 April, 2018, or 11 June – 22 June, 2018.

Cost: Three hundred thousand Tanzanian shillings only. (TZS 300,000 =) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

6. Painting and Decorations:

Course duration: Two (2) weeks.

Dates: 27 Nov. – 08 Dec. 2017, or 23 April – 04 May, 2018, or 18 June – 29 June, 2018.

Cost: Three hundred thousand Tanzanian shillings only. (TZS 300,000 = covering tuition fee and training material only.

Course ContentsClick here to read course contents

 

7.  Construction Project Management:

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Six hundred thousand Tanzanian shillings only (TZS 600,000 =) covering tuition and training materials only.

Course Contents

 

8. Civil Drafting:

Course duration: Four (4) weeks.

Dates: 27 Nov– 22 Dec 2017, or 23 April – 18 May. 2018, or 18 June – 13 July 2018.

Cost: Four hundred and eighty thousand Tanzanian Shillings only (TZS 480,000=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

MECHANICAL ENGINEERING DEPARTMENT

 

1. Plumbing and Pipe Fitting:

Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Six Hundred Thousand Tanzanian shillings only (TZS 600,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

2. Pneumatics and Hydraulics:

Course duration: Four (4) weeks.

Dates: 20 Nov. – 15 Dec. 2017, or 16 April – 11 May, 2018, or 11 June – 06 July, 2018.

Cost: Five Hundred Thousand Tanzanian shillings only (TZS 500,000/=) covering tuition fee and training materials.

Course ContentsClick here to read course contents

 

3. Welding and metal Fabrication:

Course duration: Four (4) weeks.

Dates: 27 Nov. – 22 Dec. 2017, or 23 April – 18 May, 2018, or 18 June – 14 July, 2018.

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and training materials.

Course ContentsClick here to read course contents

 

4. Refrigeration and Air Conditioning:

Course duration: Four (4) weeks.

Dates: 20 Nov– 15 Dec 2017, or 16 April – 11 May 2018, or 11 June – 06 July, 2018

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and educational field visits inclusive.

Course ContentsClick here to read course contents

 

5. Basics of Gemology

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Five Hundred Thousand Tanzanian shillings only (TZS 500,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

6. Solid Work

Course duration: Four (4) weeks.

Dates: 27 Nov. – 22 Dec. 2017, or 23 April – 18 May, 2018, or 18 June – 14 July, 2018.

Cost: Five Hundred Thousands Tanzanian shillings only (TZS 500,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

GENERAL STUDIES DEPARTMENT

 

1. Fumigation and Waste Disposal:

Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Five Hundred Thousands Tanzanian shillings only (TZS 500,000/=) covering    tuition fee and training materials only.

 

Course ContentsClick here to read course contents

 

2. Basic Accounting:

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only.

 

Course ContentsClick here to read course contents

 

3. Store keeping and Inventory Control:

Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only.

 

Course Contents

 

4. Business Incubation Management Workshop:

Course duration: Four (4) Days.

Dates: 6 Nov. – 9 Nov. 2017, or 23 April – 27 April. 2018, or 18 June – 22 June, 2018.

Cost: Four Hundred thousand Tanzanian Shillings only (TZS 400,000/=) to cover tuition fee, breakfast, lunch and training materials.

Course ContentsClick here to read course contents

 

5. Laboratory Management and Practices:

Course duration: Four (4) days.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

6. Laboratory Preparations of Standard Solutions and Bench Reagents:

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only. 

Course ContentsClick here to read course contents

 

AUTOMOTIVE ENGINEERING DEPARTMENT

 

1. AutoCAD Computer drafting (computer-based package of equipment that aids the design Process):

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and training materials only.

Course Contents

 

TRANSPORTATION ENGINEERING DEPARTMENT

 

1. Land Survey and Geomatics:

Course duration: One (1) week.

Dates: 27 Nov– 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and training materials only. 

Course ContentsClick here to read course contents

 

KIKULETWA RENEWABLE ENERGY, RESEARCH AND TRAINING CENTRE

 

1. Principles of Power Transmission and Distribution

 Course ContentsClick here to read course contents

 

2. Principles of Hydro power Plant Operations and Maintenance

Course ContentsClick here to read course contents

 

3. PLCs for Hydro power Engineers

Course ContentsClick here to read course contents

 

4. Solar PV Systems design and Installation

 Course ContentsClick here to read course contents

 

1. Click here to read Joining Instructions for NTA level 4-6 Government Sponsored students joining ATC in 2017-18 Academic Year.

2. Click here to read Joining Instructions for NTA level 4-6 Private Sponsored students joining ATC in 2017-18 Academic Year

3.Click here to read Joining Instructions for Bachelor Degree students joining ATC in 2017-18 Academic Year

DEVELOPMENT AND TRAINING COURSES FOR THE ACADEMIC YEAR 2017/18

The mission of ATC is to provide Competence-Based Technical Education and Training and carry out research and consultancy in science and technology for socio-economic development.  Our vision is to become a centre of excellence in training, research and consultancy in science and technology in Africa by 2020.

We are pleased to announce and advertise our short courses training programmes for the academic year 2017/2018. Our programmes offer a wide range of professional as well as tailor made training. These training programmes are for both organizations and individuals. The training process involves a detailed course work as well as a lot of practical so as to enable participants to grasp more knowledge and apply it without difficulty.

REGISTRATION PROCEDURE: Applicants can apply through college website www.atc.ac.tz, by downloading and fill the application form.

CONTACTS:   Continuing Education Department

P.O.Box 296, Arusha

Tel: (+255) 27 29 70 056

Fax No. (+255) 27 254 8337

 

CIVIL ENGINEERING DEPARTMENT

 

1. Irrigation Water Quality, Crop Water Requirement and Irrigation:

Course duration: One (1) week.

Dates: 20 Nov– 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Three hundred Tanzanian shillings only (TZS 300,000/=) covering tuition fee and educational field visits.

Course Contents: Click here to read course contents

 

2Irrigation Water Management

      Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Three hundred Tanzanian shillings only (TZS 300,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

3Water quality and treatment

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018

Cost: Six hundred Tanzanian shillings only (TZS 600,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

4. Tiling

Course duration: Two (2) weeks.

Dates: 27 Nov. – 08 Dec. 2017, or 23 April – 04 May, 2018, or 18 June – 29 June, 2018.

Cost: Three hundred thousand Tanzanian shillings only (TZS 300,000 =) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

5. Plastering:

Course duration: Two (2) weeks.

Dates: 20 Nov. – 01 Dec. 2017, or 16 April – 27 April, 2018, or 11 June – 22 June, 2018.

Cost: Three hundred thousand Tanzanian shillings only. (TZS 300,000 =) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

6. Painting and Decorations:

Course duration: Two (2) weeks.

Dates: 27 Nov. – 08 Dec. 2017, or 23 April – 04 May, 2018, or 18 June – 29 June, 2018.

Cost: Three hundred thousand Tanzanian shillings only. (TZS 300,000 = covering tuition fee and training material only.

Course ContentsClick here to read course contents

 

7.  Construction Project Management:

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Six hundred thousand Tanzanian shillings only (TZS 600,000 =) covering tuition and training materials only.

Course Contents

 

8. Civil Drafting:

Course duration: Four (4) weeks.

Dates: 27 Nov– 22 Dec 2017, or 23 April – 18 May. 2018, or 18 June – 13 July 2018.

Cost: Four hundred and eighty thousand Tanzanian Shillings only (TZS 480,000=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

MECHANICAL ENGINEERING DEPARTMENT

 

1. Plumbing and Pipe Fitting:

Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Six Hundred Thousand Tanzanian shillings only (TZS 600,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

2. Pneumatics and Hydraulics:

Course duration: Four (4) weeks.

Dates: 20 Nov. – 15 Dec. 2017, or 16 April – 11 May, 2018, or 11 June – 06 July, 2018.

Cost: Five Hundred Thousand Tanzanian shillings only (TZS 500,000/=) covering tuition fee and training materials.

Course ContentsClick here to read course contents

 

3. Welding and metal Fabrication:

Course duration: Four (4) weeks.

Dates: 27 Nov. – 22 Dec. 2017, or 23 April – 18 May, 2018, or 18 June – 14 July, 2018.

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and training materials.

Course ContentsClick here to read course contents

 

4. Refrigeration and Air Conditioning:

Course duration: Four (4) weeks.

Dates: 20 Nov– 15 Dec 2017, or 16 April – 11 May 2018, or 11 June – 06 July, 2018

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and educational field visits inclusive.

Course ContentsClick here to read course contents

 

5. Basics of Gemology

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Five Hundred Thousand Tanzanian shillings only (TZS 500,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

6. Solid Work

Course duration: Four (4) weeks.

Dates: 27 Nov. – 22 Dec. 2017, or 23 April – 18 May, 2018, or 18 June – 14 July, 2018.

Cost: Five Hundred Thousands Tanzanian shillings only (TZS 500,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

GENERAL STUDIES DEPARTMENT

 

1. Fumigation and Waste Disposal:

Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Five Hundred Thousands Tanzanian shillings only (TZS 500,000/=) covering    tuition fee and training materials only.

 

Course ContentsClick here to read course contents

 

2. Basic Accounting:

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only.

 

Course ContentsClick here to read course contents

 

3. Store keeping and Inventory Control:

Course duration: One (1) week.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only.

 

Course Contents

 

4. Business Incubation Management Workshop:

Course duration: Four (4) Days.

Dates: 6 Nov. – 9 Nov. 2017, or 23 April – 27 April. 2018, or 18 June – 22 June, 2018.

Cost: Four Hundred thousand Tanzanian Shillings only (TZS 400,000/=) to cover tuition fee, breakfast, lunch and training materials.

Course ContentsClick here to read course contents

 

5. Laboratory Management and Practices:

Course duration: Four (4) days.

Dates: 27 Nov. – 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only.

Course ContentsClick here to read course contents

 

6. Laboratory Preparations of Standard Solutions and Bench Reagents:

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Three hundred thousand Tanzanian Shillings only (TZS 300,000/=) covering tuition fee and training materials only. 

Course ContentsClick here to read course contents

 

AUTOMOTIVE ENGINEERING DEPARTMENT

 

1. AutoCAD Computer drafting (computer-based package of equipment that aids the design Process):

Course duration: One (1) week.

Dates: 20 Nov. – 24 Nov. 2017, or 16 April – 20 April, 2018, or 11 June – 15 June, 2018.

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and training materials only.

Course Contents

 

TRANSPORTATION ENGINEERING DEPARTMENT

 

1. Land Survey and Geomatics:

Course duration: One (1) week.

Dates: 27 Nov– 01 Dec. 2017, or 23 April – 27 April, 2018, or 18 June – 22 June, 2018.

Cost: Four Hundred Thousand Tanzanian shillings only (TZS 400,000/=) covering tuition fee and training materials only. 

Course ContentsClick here to read course contents

 

KIKULETWA RENEWABLE ENERGY, RESEARCH AND TRAINING CENTRE

 

1. Principles of Power Transmission and Distribution

 Course ContentsClick here to read course contents

 

2. Principles of Hydro power Plant Operations and Maintenance

Course ContentsClick here to read course contents

 

3. PLCs for Hydro power Engineers

Course ContentsClick here to read course contents

 

4. Solar PV Systems design and Installation

 Course ContentsClick here to read course contents

 

Bachelor Degree in Electrical and Biomedical Engineering

This program offers both Certificate of Ordinary Diploma and Bachelor Degree in Electrical and Biomedical Engineering awards. The programs’ curricula are designed to cater for the needs of students, future employees, and employers in the field of Electrical and Biomedical Engineering (EBE). Therefore, the program is geared towards producing innovative, creative, and flexible work force that will be responsive to the societal needs. The program also covers an area of entrepreneurship, which is very essential in this area of stiff job market competition globally.

Admission Requirements. (Done for review)

Admission to our Ordinary Diploma Program will be open to candidates who have a certificate of Secondary Education with a minimum pass grade of D in Mathematics, Physics / Engineering science, Chemistry, and Biology or English.

Admission to higher NTA levels (5 &6) will be open to those who have passed all modules of either NTA4 (for admission to NTA 5) or NTA 5 (for admission to NTA 6) in the similar academic programs from ATC or other institutions with similar academic programs and accredited by NACTE.

Admission to our degree programme will be open only to candidates who have successfully completed and passed all modules of NTA 6 in Biomedical, Electrical, and Electronics and Telecommunications Engineering.

Program Philosophy

The philosophy behind this program contents is geared towards producing innovative, creative and flexible graduates and technicians. As such students are given opportunity to specialise in the fields of their interest.

The philosophy of the programme is based on the following principles and assumptions:

a)      To promote economic progress through delivering expertise services in the electrical and biomedical engineering industry.

b)      To produce graduates who can proceed with further education at higher levels and foster lifelong learning.

c)      To create job opportunities through self employment scheme.

d)     To provide foundations of basic principles, competencies and expertise that will give the greatest opportunity for graduate career development

e)      To facilitate changes in interest, specialities, roles and responsibilities.

f)       To provide in depth understanding of variety of advanced electrical and biomedical engineering applications and systems.

g)      To stimulate student interest in designing related to electrical and biomedical engineering applications and motivation in pursuance of further knowledge, research and imaginative thinking.

h)      To produce graduates who are ready to enter the engineering employment and flexibly satisfy the needs of industry.

i)        To satisfy the requirements of the National Council for Technical Education which is regulating Technical Education in the Country. 

Objectives of the program

The objectives of the programme are to establish:

a)      Appropriate basic practical and analytical competencies in product design, development engineering, commissioning and manufacturing processes in the context of the market economy and financial control.

b)      An appreciation that the solution to electrical and biomedical engineering problem must involve the integration of wider engineering disciplines, consideration of their economic and environmental consequences and the employment of non-technical disciplines, such as financial management and marketing, all of which are necessary contributors to the success of the student

c)      Initiative, imagination, perception and confidence sufficient to cope with new situations, problems and ideas by critical analysis of situations, synthesis of practical solutions and application of new idea;

d)     Potential knowledge for creative and critical thinking, including critical self-awareness.

e)      The ability to communicate with members of an organisation and policy makers at the same, higher and lower levels of expertise or responsibility.

Mode of Training  

Our students enjoy training delivered by experienced local and international faculties in vast areas of the engineering fields. Every semester we have planned hospital visits and industrial excursions. Our students enjoy broad range of exposure to various areas of the engineering fields through excursions and existing infrastructures at our workshops, laboratories and industries within and outside the city.

Annually, students shall take industrial internship for ten (10) weeks where they may have access to modern facilities while mingling with industrial/hospital supervisors, through this approach our students easily link training at the college with actual applications in the workplaces.

Besides normal practical sessions, we also provide opportunities for students to undertake mini projects on the course of semester training to apply skills and knowledge obtained in specific modules in a respective semester.

With such training approach, we have built competent graduates who would serve in the industry as well as self-employment.

 Expected Competencies

Students undertaking training in Ordinary Diploma in Electrical an Biomedical Engineering are expected to acquire multiple skills ranging from installation, routine, preventive and corrective maintenance, construction, diagnosis, repairs and modifications of simple and medium scale electrical and biomedical systems to developing technical reports, written work procedures and installation guidelines.

On top of the above skills set, students undertaking our degree program will also be able to analyse and design electrical and Biomedical systems for industrial, commercial and Hospital equipment; specify materials, types of installations, production methods and quality standards; establish control on efficient functioning and safety of electrical and Biomedical systems, plan, organize and monitor maintenance and repair of electrical and Biomedical systems, and communicate clearly by applying ICT and other sciences in solving engineering problems.